Learn How To Configure The TP-Link Wireless Router As Access Point?

Do you want to know how to configure the TP-Link wireless router as Access point? Well, before understanding that let’s enlighten you about what is Access point mode? When you set your wireless device in an access point it acts as a connection between wireless devices to connect to the router. It extends the wireless routers’ signals without acting as a separate wireless device. So if you set your wireless extender in AP mode or access point mode then it means you are enabling it to extend the wireless routers’ signals as a router only. In this blog, we will explain to you how to configure the TP-Link wireless router as an access point. Follow the blog carefully.

Steps To Set Up TP-Link Router In Access Point Mode

Follow the points written below to set the TP-Link in access point mode, but before that connecting your TP-Link wireless router to your primary wireless router with the help of an ethernet cable is always advised. Do not link it via WPS as the configuration might be very tough

1. Initiate by connecting your TP-Link wireless router to the main wireless router with the help of an ethernet cord.

2. Now, switch on the TP-Link wireless router and wait for it to communicate with the existing wireless router.

3. Once the TP-Link is green, it implies that the connection is established and is all set for further configuration. 

4. Now, take an ethernet wire to directly connect the TP-Link router to the PC device.

5. After that, launch a web browser and enter the IP address that is written on the stick-on label present on the router.

6. The IP address is 192.168.1.1 or 192.168.0.1 usually. After pressing the enter button you must see the TP-Link screen on your display. 

7. Now, use the login information of the router which is ‘admin’ for both the username and passphrase.

8. Now, choose the network and LAN option.

9. Finally, proceed with configuring the TP-Link router to an address inside your home network.

10. After saving the new settings you will be logged out of the normal main screen. 

It is very important to assign an IP address. You are required to configure your TP-Link router outside the DHCP range 192.168.1.10 to 192.168.1.100 if your main wireless router presides in this range. For example, you can assign 192.168.1.210 to your TP-Link router. This ensures that there are no IP address conflicts between the routers even if they communicate.

1. Start by logging back into your TP-Link wireless router by filling in the new IP address.
2. Choose wireless and wireless settings from the given menu.
3. Now, keep an SSID that is different from any wireless router you have configured in the past.
4. Now, enable WPA2 as wireless security.
5. Afterward, set a strong wireless passphrase for wireless security.

6. Now, open the DHCP and then DHCP settings and disable it by clicking on the toggle.
7. There is a requirement for only one DHCP server per network.
8. Your main wireless router is supposed to perform that task.
9. Now, click on save. Now, choose to reboot the system by clicking on System tools.

10. Now, allow the TP-Link wireless router to restart and wait for a minute to let it reload the configuration settings.
11. Now, detach the ethernet wire from the TP-Link wireless router and computer and then connect it via wireless.
12. Utilize the network SSID and passphrase to connect to the wireless router.

Your TP-Link In Access Point Mode!

With this, you have to know How to configure the TP-Link wireless router as Access Point? You need to follow the above-mentioned tips very precisely and carefully to turn on the TP-Link access point mode. These steps are quite technical for a person who does not have any idea about technology or IP addresses. So, if you are stuck and need some help, chat with our technical assistance team and get the best help in the least possible time.